BizTalk360 - Monitoring
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
You can provide any ideas/suggestions related to improving BizTalk360 monitoring capabilities in this forum.
92 results found
-
API to create/update an alarm
Is there an API available that will allow me to create/update an alarm?
We have built a .Net based deployment tool that takes care of all of our deployments and it would be good if we could tie in the Alarm create/update for new artefacts as part of this process.
By Patrick Smith.
1 voteAPI's are exposed in BizTalk360 API documentation.
-
Independent email configuration for all the ports
We understand Email alerts will be sent only when the count is back to zero when number of alerts reaches its limit. In future versions, we hope independent email configuration for all the ports regardless of alert count with other port failures.
Idea shared by Suveera Nagabhyrava.
1 voteHi , By enabling the Alert Reset Option in the Alarm configuration, the system will automatically reset the alert count when it reaches the limit.
-
Data monitoring custom time
New Message Box data monitoring tool – This new feature to perform actions is great allowing automatically messages to be resumed or terminated. The only issues with that is the minimum frequency we can set is only to 15 minutes and it would be perfect if we are allowed to set lower values like seconds or 1 minute for example. Also the option to send or not a notification for that as sometimes we don’t need the email and the last suggestion is to add the port name as a filter for that as sometimes we only would like to…
2 votesHi ,
BizTalk360 now supports a Data Monitoring frequency of fewer than 15 mins. You can configure a minimum frequency of 5 mins.
Thanks,
BizTalk360 Team
-
Enabling/disabling SQL jobs
Enabling/disabling SQL jobs is not supported from BizTalk360 portal? it would be great to include this feature.
By Ming.
2 votes -
Adding emails in CC for BizTalk360 alert emails
We have got a requirement stating that the customer wants the BizTalk 360 alerts with his mail id configured in CC.
By Joyce Dorothy.
2 votesSMTP Notification Channel has the capability to add CC in the email notification.
Please refer this article for more details
https://blogs.biztalk360.com/group-email-using-smtp-notification-channel-in-biztalk360BizTalk360 9.0 Release Notes
https://docs.biztalk360.com/docs/v9010950905 -
User access profile
Hello BizTalk360 team,
I am helping TF1 test your monitoring solution and after my first presentation to different users, I have some remarks from them which I think might interest you :
· User management : possibility to create management profiles, and attach those profiles to users. I am aware that we can achieve something similar through AD groups, but they don’t seem to be very enthusiastic about it – mainly because the process of requesting membership to a specific AD group is slow…
· Graphical flow tracking and Message Box Queries (In particular, but this suggestion may apply to…5 votesHi ,
The access policy is improved now for applications, in which only the permitted application data can be listed in the Message Box or Tracking section.
Thanks ,
BizTalk360 Team
-
Displaying an Alarm Dashboard
We set up several alarms for different dataflows we have in our BizTalk environment (with different time-schedules).
We would like to setup the dashboard on a Big screen for monitoring-purposes. However switch between alarms in the dashboard is pointless in this situation. We would like to suggest an Alarm-dashboard which shows the status of all the alarms. This is a screen we can put on a big screen.- Idea shared by Joost Easton.
8 votesGlobal dashboard is the feature that meet this use case
-
BAM monitor filters
Hello!
Is it possible to have the same evaluation criteria in BAM monitor as there is in process Monitor?
Ø in process Monitor > = <
Ø in BAM > =By Støen May-Britt
2 votesHi ,
The threshold condition < is added in the latest BizTalk360 version,with this you can configure the warning and error threshold with <.>or = conditions.
Thanks,
BizTalk360 Team
-
Increase the limit of SQL server
To increase the number of SQL servers in BizTalk 360 for monitoring
By Simon Laverdière
4 votesFor platinum tier number of SQL Server is increased to 8, for other tiers, support is up to 4 SQL Servers for Administration and Monitoring
-
Monitor "Store procedure" in SQL query monitoring
In the Custom SQL Queries panel, customer has defined a query, with the "EXEC" and calling a store procedure and it works very well. The query returns only one integer value. This is put (that call a store procedure) in the Database Query related with an alarm. But in the Database Query, the return value is empty. It seems to not get the return value? So the alarm is always in error. Hence the database query put into an alarm must support the call of a stored procedure.
-Idea by Martin Bergeron.
3 votesHi ,
Users can now manage to execute the stored procedure in a secure SQL query by enabling the option "Allow Stored Procedure Execution" in the Global Settings.
Thanks,
BizTalk360 Team
-
Certain receive location disabling on weekend
The requirement is to have a certain receive location to be disabled on weekends. BizTalk only has everyday ability for this.
Idea shared by Kada Dunn.
2 votesHi ,
This use case can be achieved by using the "Automated Task" feature which is added in the latest BizTalk360 release v10.3 .
Refer release notes for more details.
Thanks,
BizTalk360 Team
-
Don't save results for 'Do not monitor' artifacts
We have quite a lot of servers, and thus quite a few artifacts we monitor. However, we have way more artifacts (NTServices, SQL jobs, etc.) that we do not monitor. But I notice these artifacts still add rows to the table b360alertMonitor_LogStateCheck (with ExpectedState 2). This gives us a lot of useless rows in this table for things we don't want to monitor anyway. Is there a way to turn this off? We now have 17 million rows in this table, and we only keep this data for a week (the cleanup job works fine).
I can write…3 votesHi ,
New State called 'UnMapped' is introduced to maintain the artifacts which are not mapped for monitoring. Now the entries are not updated in the LogStateCheck table.
Thanks,
BIzTalk360 Team
-
Support SQL cluster monitoring
When SQL 1 server went down and SQL 2 (clustering) starts running BizTalk Server starts capturing and running. But BizTalk360 still pointing to that SQL1 sever and keep pooping the message "Disks: Configured Disk . No longer exist in the Server XXXXXXX." we expect BizTalk360 should support SQL Cluster Monitoring.
By Duane
16 votesThis feature is available in the latest version of BizTalk360
-
Terminate the service instances older than XX hours through Automatic Actions in BizTalk360
We have a need for functionality regarding the filtering by time range in Data Monitoring.
We have a case where we are moving data from customer’s ERP to their CRM daily using BizTalk.
And sometimes those transfers fail.
If the transfer is older than 24h it already obsolete and we would like to get rid of that kind of BizTalk instances using the Data Monitoring.
As far as I know there is no way to setup it a way where it would terminate the instance if the creation date is older than 24h from current time?
The closest we have…2 votesThis feature request has been incorporated in the latest version of BizTalk360 v10.1. To know more read the release notes (https://docs.biztalk360.com/docs/v101)
-
Monitoring alert content improvements
We have done a DR test on our biztalk environment and we received the alert stating “Monitor Error” . When The server XXXX was down during this alert, I expect the alert to say something more alarming like “SERVER DOWN” instead of “Monitor Error”.
2 votesMonitoring alert important when the server is down in the latest of BizTalk360 v10.4
-
Data monitoring could not ended at midnight
It is not possible to end a data process monitoring at 12h00am (midnight). Let say we want to monitor 7h00pm until 12h00am, the web interface got an error: "The end time should be atleast 15 mins later than the start time.". We have to set 23h45 or 00:15. So it is impossible to get a result at 12h00am.
If we set 23h45, we don't have the last 15 minutes of the day included in the monitoring. If we set 00h15, the first 15 minutes of the new day is part of the new day, not the last day.
So our…4 votesHi,
BizTalk360 now supports business hours to span across the day for monitoring. Say you can monitor from 7 PM to 12 AM.
Thanks,
BizTalk360 Team
-
We would like to see auto correction action to be coorelated to the monitoring interval
We would like to see auto correction action to be corelated to the monitoring interval
6 votesThe Autocorrect function can be customized to operate exclusively during business hours by setting a monitoring schedule.This means the Autocorrect will work based on monitoring scheduled time , you can set this in alarm configuration.
-
Find Applications with NO alarm
Find Applications with NO alarm.
How can you verify alarms being set on all applications?
As is there is no way to do this. I want a feature that I can see Applications not mapped to a specific alarm. As you do have the list of all applications and you do have the list of all alarms - it is not very hard to implement this feature4 votesUnmapped Application Artifacts will get listed under the application section in manage mapping.
-
Show all receive locations, all send ports or all orchestrations for application monitoring in one overview
In application monitoring I'd like to have the option to show all receive locations, all send ports or all orchestrations in one overview.
This would make it much faster and easier to add all items in your monitoring.
And this would also make it much easier to add new items in your existing monitoring or to do a weekly or monthly check whether all new items are added in your application.
Now we have to click and reclick thousands of items if we want to check we have all items in our application monitoring. Especially when you have a lot…7 votesHi ,
The consolidated view of all the artifacts which are not mapped for monitoring is now shown under Unmapped Application Artifacts.
Thanks,
BizTalk360 Team
-
Alert if message are active for over a day
Messages are in Active status over days. Which is wasting resources. BizTalk 360 should be able to monitor and alert, if a message has been in Active in Running Service Instance for over 3 hours
5 votes
- Don't see your idea?