BizTalk360 - Monitoring
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
You can provide any ideas/suggestions related to improving BizTalk360 monitoring capabilities in this forum.
101 results found
-
Data Monitoring File Size
Would be nice to add additional Filter possibility, not only based on the number of file received, but also on the file size. At a customer site we have a WS Request that sometimes receives a wrong response. This response is much more smaler than the expected. Would be nice if I could configure an alarm if the file size is below a kb value.
24 votesHi, Our latest version 10.8 introduces the capability to monitor the message size transmitted between the receive location and the send port. You can now configure the expected size in process monitoring, and if the message size violates the specified threshold configuration, it will trigger an alert.
Check out the release notes for more updates.
Thanks,
BizTalk360 Team
-
Automation of disabling or stopping send ports and receive locations for scheduled outages, certain days of the week and hours.
Automation of disabling or stopping send ports and receive locations for scheduled outages, certain days of the week and hours.
22 votesThis use case can be achieved with the BizTalk360 Automated Task feature which has been released in v10.3.
To know more read the release notes.
-
Support SQL cluster monitoring
When SQL 1 server went down and SQL 2 (clustering) starts running BizTalk Server starts capturing and running. But BizTalk360 still pointing to that SQL1 sever and keep pooping the message "Disks: Configured Disk . No longer exist in the Server XXXXXXX." we expect BizTalk360 should support SQL Cluster Monitoring.
By Duane
16 votesThis feature is available in the latest version of BizTalk360
-
Notification of orchestration instances which are active for more than 45 minutes
Notification of orchestration instances which are active for more than 45 minutes using Data monitoring.
by
Azeef Kabeer15 votes -
Monitoring clustered disks
Right now BizTalk360 is able to monitor disk spaces in BizTalk and SQL servers, it will be useful to monitor clustered disks. At the moment if the disk failover to secondary server, 360 starts alerting.
12 votesMonitoring clustered disks available in the latest version of BizTalk360 (9.1)
-
Web Endpoint Monitoring should have configurable 'pinging' interval
We would like to check a web endpoint less often than once a minute to reduce overhead.
10 votesThis feature has been available in the latest version of BizTalk360
-
9 votes
This use case can be achieved with the BizTalk360 Automated Task feature which has been released in v10.3.
To know more read the release notes.
-
Age-based monitoring for Data Monitoring
When creating a Data Monitoring alarm, it would be great to be able to check for instances which are older than XX days/minutes/seconds.
For example : let's say we have 2 dehydrated (or suspended, or whatever) orchestrations, 1 created 3 days ago and 1 only 10 minutes ago. This feature would allow BizTalk360 to raise an alarm for instances that take too much time to complete, or suspended instances that have obviously been overlooked.
9 votesThis feature request has been incorporated in the latest version of BizTalk360 v10.1. To know more read the release notes (https://docs.biztalk360.com/docs/v101)
-
Email template
To enable users to select any range of colors (RBG, HEX Values) so that the emails colors and templates can be customized per company styles…
8 votesHi ,
The template can be customized with the predefined colors provided based on the theme selection(Dark/Light ).
Thanks,
BizTalk360 Team
-
Displaying an Alarm Dashboard
We set up several alarms for different dataflows we have in our BizTalk environment (with different time-schedules).
We would like to setup the dashboard on a Big screen for monitoring-purposes. However switch between alarms in the dashboard is pointless in this situation. We would like to suggest an Alarm-dashboard which shows the status of all the alarms. This is a screen we can put on a big screen.- Idea shared by Joost Easton.
8 votesGlobal dashboard is the feature that meet this use case
-
Include event log message in notification email
When a notification email is send for any event log violation like event id, event text etc currently it only shows a generic description saying event log alert triggered. It will be useful if you can include the actual text of the event, this will avoid user logging on into the BizTalk360 portal to see the actual message.
8 votesDear Customer,
This feature has been implemented as part of our releases. Please upgrade to our latest v8.7 and do get back to us at support@biztalk360.com should you face any issues.
https://docs.biztalk360.com/docs/event-viewer
Thanks
BizTalk360 Support -
Send ESB Detail In Notification - Improvement
When you activate the option “Send ESB Detail In Notification”, you are getting the data show below with the number of faults per Fault Code. This data is grouped by Fault Code which is the default grouping. I need the option to be able to choose the “group by” setting on one of the three fields: Fault Code (the default grouping now), Error Type or Exception Message. In the case below you need to group the errors on the Exception Message because this can be different for the same errorcode.
ESB Fault Details in the application: Company.BizTalk.Application
Fault Code: ESB0002,…
7 votes -
Disable group by error code in data monitoring "Send Instance Detail In Notification"
In order to setup real reports that can be sent to end users or technical super users with all errors given the time interval set in the monitoring details, there must be an option to disable the grouping by error code for "Send Instance Detail In Notification" option.
Example: An orchestration hits the suspend shape with different errors for the given process, each time the data monitoring alarm fetches these errors only the latest will be displayed in the notification as the suspend shape always gives the same error code (obviously).
7 votesThis feature has come as part of the version 8.9 release. Sing up to our newsletter to be notified of upcoming releases.
-
Monitoring for Always On Instances
With BizTalk 2016 you have the possibility to configure the DB with Always On. Because of MSDTC you have to create at least 4 instances and to create the BizTalk Db in these instances. At the moment in BizTalk360 you can only monitor 2, this should be now changed to allow a better control of all bts DB.
7 votesNow SQL Server count has been increased 4 to support Always on Instances
-
Restrict alarms by user group
When defining alarms it should be possible to separate alarms by "user group". Essentially we will be sharing access to BT360 with our client and we would like them to be able to create their own alarms for their applications. However we don't want them to be able to edit (or delete) our alarms. It should be possible to separate alarms by user group.
7 votesRestricting the alarms by user access policies request has been implemented in the latest version of BizTalk360
-
Consolidated View of Alarms in Monitoring Dashboard
In the current version (8.2), the Monitoring Dashboard only displays one alarm at a time. In an organisation that configures many alarms, this means they can't see an overview in one screen of all mappings - unless they include an additional alarm that includes everything, which would cause duplicate emails, etc. Pretty sure that older versions of BizTalk360 included a consolidated view(?)
7 votesIn the latest version of BizTalk360(9.0.2151.2808) BizTalk Group Dashboard feature is introduced and it gives a consolidated view of the status of all the artifacts which are mapped to all the alarms in an environment.
https://docs.biztalk360.com/docs/v9021512808 -
Show all receive locations, all send ports or all orchestrations for application monitoring in one overview
In application monitoring I'd like to have the option to show all receive locations, all send ports or all orchestrations in one overview.
This would make it much faster and easier to add all items in your monitoring.
And this would also make it much easier to add new items in your existing monitoring or to do a weekly or monthly check whether all new items are added in your application.
Now we have to click and reclick thousands of items if we want to check we have all items in our application monitoring. Especially when you have a lot…7 votesHi ,
The consolidated view of all the artifacts which are not mapped for monitoring is now shown under Unmapped Application Artifacts.
Thanks,
BizTalk360 Team
-
Monitoring throttling conditions
Currently you can visualize the health of your BizTalk environment throttling conditions using the "Throttling Analyser" feature, it will be good if we can have a mechanism to get notified if any particular throttling state remain active for a particular period.
7 votesThis feature has come as part of the version 8.5 release. Sing up to our newsletter to be notified of upcoming releases.
-
Monitoring various queues like MSMQ, MQ Series, Azure Service Bus
As part of the integration solution we will be using various queues like MSMQ, MQ Series etc, it will be nice if BizTalk360 can monitor some of the common queuing technologies that's available in the market.
7 votesWe are now supporting MSMQ and Azure Service Bus
-
Schedule recurrent maintenance stops
It is possible to stop the alerts for maintenance immediately or in the future.
But what could be very good is the ability to set up recurrent stop for alerts, for example, each sunday at 4AM for 4 hours.6 votesRecurrence schedule maintenance configuration is implemented in BizTalk360 9.1 version. https://docs.biztalk360.com/docs/v9110890505
- Don't see your idea?