BizTalk360 - Administration
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
Version 11.1 is now released. Download and give it a try
You can provide any ideas/suggestions related to the Administration & Operations capabilities of BizTalk360 in this forum.
157 results found
-
"Advanced Event Viewer with the filter of messages"
About this topic "Advanced Event Viewer with the filter of messages".On the very old versions of B360, this filter was usable with the "contains" operations. So we were able to search for a specific keyword in the event logs and B360 was able to get the results. In the actual version, we only have the option "is equal to", so we have to write the exact message to get a fetch, which is impossible. Our helpdesk still request to get a direct access to the Biztalk Server to
We want to search all messages in the event viewer that contains…
4 votesThe message filter has "contains " options to address this scenario.
-
Application mapping for all artifacts in one go
Would like to set up the mappings for BizTalk360 alarms to enable the monitoring for all receive/send/orchestrations/service monitoring for all applications in one go.
At the minute we need to go through the apps one at a time (example there are 83 application) turning it on but it would be much easier if there is a click option "enable all" and then go through and turn off or amend as required if i see things flag up as red.
1 vote -
Custom notification Channel -Service now
This is related to the configuration of BizTalk360 with ServiceNow. able to configure it successfully and incidents are coming in Service Now. But, I need the functionality like, I can create incidents and will be assigned to different groups based on the services from the BizTalk360 side.
1 voteDear Customer
BizTalk360 does have a custom notification channel integration for ServiceNow. Kindly check out our documentation and let us know if you face any issues on support@biztalk360.comThanks
BizTalk360 Support -
Add a delay for autocorrection
Is it possible to add a delay between each autocorrection attempt? To avoid reaching too fast the number of retry and to cover particular use cases where we need to wait before re-activating a receive location for example?
9 votesAutocorrect delay can be achieved with Autocorrect reset capability. For more details please refer the following article
https://blogs.biztalk360.com/introducing-send-port-groups-management-and-reset-functionality-in-biztalk360-monitoring/This feature is available in the latest version of BizTalk360 (9.0)
https://docs.biztalk360.com/docs/v9010950905 -
Larger Fault Description Textbox
The SQL field is 4,096 chars so a one line textbox is too small. Make it bigger or resizable
3 votes -
Database file utilization
We have had a few outages lately because the BizTalkMsgBoxDb and the BizTalkDTADb log files have grown out of control and filled up the entire disk. I am not sure if this is possible given the permissions available to the application but it would be really nice if the database file and log file utilization was monitored either for rapid expansion or percentage of disk space so an alarm can go off before everything hits critical levels. Alternatively it could look for long running non-committed transactions that could send the log file spiraling out of control.
1 voteDatabase file size monitoring for BizTalk databases is available in the latest version of BizTalk360.
-
Rename alarms
Currently, it is not possible to rename alarms, once they have been created. When editing an alarm in the "Monitoring / Manage Alarms" view, it would be good to have the possibility to rename the alarm.
10 votesThis feature has come as a part of the version 8.4 release. Sing up to our newsletter to be notified of upcoming releases.
-
Show all applications for users who are no superuser
In User Acces Policy you can give access for all Applications and for all custom queries.
I'd expect all Applications and all Custom queries will select everything from the table so you don't have to change this after adding an Application or a Custom Query.Unfortunately this doesn't work like my expectation. So I have to change this for multiple user everytime an applicaton or a custom query is added.
And this happens many times because we have many Applications and new Applications are added almost every month.5 votesThis feature has come as part of the version 8.9 release. Sing up to our newsletter to be notified of upcoming releases.
-
Support message security for resubmit
All our BizTalk services need to support message security (TransportWithMessageCredential to be precise). This includes any resubmit services. At the moment there is no way to specify client credentials in BizTalk360, so the suggestion is to support client credentials for message resubmission.
6 votesHi ,
BizTalk360 ESB Feature is improved to resubmit messages using the client credentials configuration of the Receive Location. Upgrade to latest version 10.7 Release notes-https://docs.biztalk360.com/docs/v107
-
Status of your issues on the biztalk360 support site
This motion is for the overview and status of issues on the biztalk360 support site.
It is very inconvenient that all issues always have the status "Waiting for your reply".
Even if the last comment form BiaTalk360 is that they will contact me when an issue is fixed the give this issue the status "waiting for your reply".
I have mentioned this once in the issue itself but with no succes.
Their answer was sorry for the false satus, we will change this.
And even this issue still have the status .. "Waiting for your reply"4 votes -
Increase the maximum number of retry for autocorrection
The maximum number of retry for autocorrection is limited to 5. Can it be configured somewhere and not limited to 5?
2 votesAutocorrect reset capability will provide you to reset the auto correct counters after x minutes.
For more details you can refer this article
https://blogs.biztalk360.com/introducing-send-port-groups-management-and-reset-functionality-in-biztalk360-monitoringThis feature is available in the latest version of BizTalk360
https://docs.biztalk360.com/docs/v9010950905 -
"All applications" application in the Alarm mapping
I have a particular case where a lot of artefacts, distributed across multiple apps, needs to be mapped with the same alarm.
I don't want to dive into each app to select the artefacts so it could be good to have a flat list of all receive locations / send ports / orchestrations with a search and then the ability to select a lot of these artefacts and set the monitoring status and auto-correct.2 votesAs Support has provided a workaround, We hope we can close this request. Please do get back to us if you face any issues.
BizTalk360 support -
Publish Secure SQL Query as Widget
We just want to publish the query results on the dashboard in tabular format. At this point we don't yet need fancy PowerBI graphical view of this data.
9 votesHello everyone,
As support has provided a workaround, we are now closing this request. Please do get back to us if you face any issues in implementing it.
Thanks
BizTalk360 Support -
Querying Management Database and pin it to Custom Dashboard
Currently we have ability to query the Message box database , it would be nice if we are able to query Management Database for viewing the list of Receive location/Send port changes Through BizTalk 360 to keep a track of all changes in one screen and pin that to custom Dashboard
3 votesIn the latest version of BizTalk360, we have the capability to pin the results of secure SQL queries results to the dashboard.
-
Increase the maximum number of attachments to download
There is a limit of 50 attachments to download in Graphical Flow (Tracking).
Must there be a limit?
I suggest that max matches will set the upper limit, but to keep the configuration so it is possible to set the limit lower for those who need it.7 votesGraphical Flow attachment is not restricted by count but it's by attachment size. Number of the email attachment is allowed up to mail restriction Size (10 MB max) in system settings.
-
Rename a messaging pattern directly from the detail
In the Messaging Pattern list, if I click on a GUID for a not-named messaging pattern, I open the detailed view of the flow.
From here, if I want to rename the pattern, it is not possible... so I need to go back to the list, and search with the GUID and then rename it...
It could be much more convenient to renamed it directly from the graphical message flow.2 votesThis feature has come as part of the version 8.8 release. Sing up to our newsletter to be notified of upcoming releases.
-
Copy alarm mappings from one alarm to another
When copying alarms in the "Monitoring / Manage Alarms" view, the alarm mappings are not copied, only the settings for alarms are copied. It would be good to be able to copy alarm mappings from one alarm to one, or many, other alarms.
3 votes -
A grid added to Stop Alerts for Maintenance, so you are able to view, edit, delete future maintenance schedules
Currently you are not able to view, edit, or delete Stop Alerts for Maintenance entries. I like to be able to enter Stop Alerts in the future for upcoming maintenance windows. We need to be able to view, edit, or delete those Stop Alerts.
10 votes -
Send alerts for event viewer errors with complete error in the email body
It would be good to send alerts as the soon as the errors written to event viewer with the complete error message in the email body insteade of just raising an alert saying there are some errors in the event viewer..This will avoid to buy other tools to send alerts for event viewer errors.
12 votes -
Resubmit functionality for ESB Itinerary based solutions
Currently BizTalk 360 doesn’t support generic resubmission for Itinerary based solutions where the itinerary attached to the message in the ESB Exception database is resubmitted along with the message so that the message continues on at from the same step it previously failed at. This should be a general resubmission mechanism for all Itinerary based solutions.
7 votes
- Don't see your idea?