BizTalk360 - Monitoring
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
You can provide any ideas/suggestions related to improving BizTalk360 monitoring capabilities in this forum.
72 results found
-
Add option to check FTP connection every specific period
Currently we have setup a datamonitoring for most of our external FTP partners as like a HeartBeat mechanism. However some our partners are not that amused if we connect every 2 minutes to their FTP environment.
Therefore would it be great if we additionally could specify the interval when a check should be done.
IE not the just the number of second, but a set like every 15/30/60 minutes etc!2 votesHi ,
BizTalk360 allows user to manage the polling interval , system will check the monitoring status only with the configured frequency . This can be configured under environment settings.
Thanks,
BizTalk360 Team
-
Sort by alphabetic order the
Hi,
When defining a new process monitor, the list of receive locations or send ports should be sorted in the alphabetical order and/or it could be great to have a search filter.1 voteIn the latest version of BizTalk360 v10.2, Receive Location/Send Ports are displayed in alphabetical order
-
Make the ‘time out value’ as configurable parameter in End Pont Monitoring
Could you please make the ‘time out value’ as configurable parameter, so that we can set different ‘time out value’ to different end points.
1 vote -
Mass remove orphaned feature
Hi,
When we monitor a lot of artefacts and after an import of an alarm exported from another environment, we have sometimes a lot of orphaned items.
It could be very helpful to have, in the import process, a way to remove all orphaned at the same time. Otherwise, we need to go into each application, go on send ports/receive ports/orchestrations, ...2 votesHi ,
In the latest version of BizTalk360, the orphaned artifacts will not be imported to the destination environment. The list of orphaned artifact details will be listed in the import status.
Thanks,
BizTalk360 Team
-
Web Endpoint - need more details when a endpoint failed
Hi,
In the WebEndpoint monitoring feature, I tried to call a web service by using a Payload and several headers. Unfortunately I missed something in the header (SoapAction) and it failed.
I was not able to have the details of the error without going to the log file in the server itself. This is not very convenient.
It should be better to have a trace of the issue in the web portal it self (or to be able to read log files from the web site).1 vote -
BAM alarm notification condition should have lt, gt and eq
In the BAM alarm notification condition you can only choose greater than > or equal =. we also need to have less than <.
1 vote -
Request to add more details regarding MDN and 997 in alert emails for EDI data monitoring
The following details must be included in the alert email generated for EDI data monitoring:
997-
The Alert for 997 should contain the following information for the transaction we are expecting 997.
Partner Name
Transaction name
Unique number of the outbound transaction i.e shipment number/invoice number. It can be added with Interchange, group control and edi qualifiers for the better visibility.MDN –
The Alert for MDN should contain the following Info for the message it is expecting a MDN.
AS2 Partner Name
AS2 Message Id
Date/Time It sent
the AS2 From and AS2 to party information-- Also an…
2 votes -
Process Monitoring - Allow the addition of more than one receive/send combination
As per title.
Allow multiple receive/send monitors to be grouped into a single monitor. Could use AND/OR operators to tune the monitor.
2 votes -
Delete suspended file older than 1 day
Add a filter to the Data Monitoring/Message Box data folder where you can define the date to delete suspended files.
Example: delete suspended Files OLDER than 1 day.3 votesIn the latest version (v10.1), the data monitoring feature is improved to support age-based monitoring. With this improvement, you can able to terminate the suspended service instances which are older than XX minutes
-
Data Monitoring Rename
Just like the suggestion for renaming alarms (http://feedback.biztalk360.com/forums/331695-biztalk360-operations/suggestions/14516568-rename-alarms) it would be a good idea to enable the possibility to rename the data monitoring, for example on process monitoring.
6 votes -
Editing properties of multiple alarms at the same time
From time to time we need to edit properties like email ids for multiple alarms. Currently you have to open each alarm and make the necessary edits. It would be great to be able to select multiple alarms and make the edits at once.
4 votesHi,
This use case can be achieved by using the SMTP notification channel. Configure Emails Id's in the SMTP channel and map the channel to the required alarms. If there is any change in email id's then update in the SMTP channel, which will automatically reflect all the mapped alarms.
-
Report emails
We have features to generate MBV / BHM reports for specific interval or schedule.
it will be good to have a email functionality so that these reports can be configured to be sent to a particular email address / distribution.1 vote -
Need to create Night time monitoring
We need to create alarms that will monitor from evening to morning next day.
e.g we want the alarm to monitor from 17:00 PM till 09:00 AM next day. The only way is to create two alarms, however there is a gap of 00:30 min as we cannot make an alarm run till 12:00 AM only till 23:00 PM.
By Elias Pardon
6 votesHi ,
BizTalk360 now support span across the day in data monitoring . With this schedule can be configured to monitor from today to next day .
Thanks ,
BizTalk360 Team
-
Add "Data Monitor dashboard" to a custom dashboard
It should be possible to add "Data Monitor dashboard" to a custom dashboard. It should show the same GUI as you see when you access data monitoring dashboard except you should only see
the alarms for the applications you has access to. then configure that page to only show alarms of interest.1 vote -
1 vote
-
User access profile
Hello BizTalk360 team,
I am helping TF1 test your monitoring solution and after my first presentation to different users, I have some remarks from them which I think might interest you :
· User management : possibility to create management profiles, and attach those profiles to users. I am aware that we can achieve something similar through AD groups, but they don’t seem to be very enthusiastic about it – mainly because the process of requesting membership to a specific AD group is slow…
· Graphical flow tracking and Message Box Queries (In particular, but this suggestion may apply to…5 votesHi ,
The access policy is improved now for applications, in which only the permitted application data can be listed in the Message Box or Tracking section.
Thanks ,
BizTalk360 Team
-
We would like to see auto correction action to be coorelated to the monitoring interval
We would like to see auto correction action to be corelated to the monitoring interval
6 votesThe Autocorrect function can be customized to operate exclusively during business hours by setting a monitoring schedule.This means the Autocorrect will work based on monitoring scheduled time , you can set this in alarm configuration.
-
Monitor "Store procedure" in SQL query monitoring
In the Custom SQL Queries panel, customer has defined a query, with the "EXEC" and calling a store procedure and it works very well. The query returns only one integer value. This is put (that call a store procedure) in the Database Query related with an alarm. But in the Database Query, the return value is empty. It seems to not get the return value? So the alarm is always in error. Hence the database query put into an alarm must support the call of a stored procedure.
-Idea by Martin Bergeron.
3 votesHi ,
Users can now manage to execute the stored procedure in a secure SQL query by enabling the option "Allow Stored Procedure Execution" in the Global Settings.
Thanks,
BizTalk360 Team
-
Reserved space in Collapsed view-Monitoring Dashboard
We plan to use the Monitoring Dashboard on a wallboard, and would like to use the collapsed view of the Monitoring Dashboard. So that the reserved for tree views of BizTalk servers, SQL Server Instances, and BizTalk Environment will be hidden and we can able to monitor the BizTalk applications alone.
By Jack Lammerts
2 votesHi ,
you can achieve this by using the filter option in the monitoring dashboard to list only the application monitoring in full view .
Thanks ,
BizTalk360 Team
-
Adding emails in CC for BizTalk360 alert emails
We have got a requirement stating that the customer wants the BizTalk 360 alerts with his mail id configured in CC.
By Joyce Dorothy.
2 votesSMTP Notification Channel has the capability to add CC in the email notification.
Please refer this article for more details
https://blogs.biztalk360.com/group-email-using-smtp-notification-channel-in-biztalk360BizTalk360 9.0 Release Notes
https://docs.biztalk360.com/docs/v9010950905
- Don't see your idea?