BizTalk360 - Monitoring
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
You can provide any ideas/suggestions related to improving BizTalk360 monitoring capabilities in this forum.
142 results found
-
Add a timer for disabling alarm for maintenance
It would be great if there was an option to set a timer for how long to disable an alarm. In today's busy world, sometimes an alarm is turned off for maintenance or testing, and users forget to re-enable once done. I would think a default of 24 hours would be more than sufficient.
2 votesHi ,
This can achieve by using Automated Task feature in BizTalk360.Create custom work flow and map the alarms that you want to disable ,then configure the schedule time to disable the selected alarm during that time.
-
For IBM MQ we want to be able to enter the host name rather than the ip address
If we could enter the host name rather than IP address we would not be required to make a change if the backend MQ server was migrated to a new ip address thru an upgrade.
2 votesHi ,
This has been addressed in latest version of BizTalk360 v10.5.
Please read release notes for more details .
-
BizTalk Group Dashboard - Clickthrough Error & Warning Pane
On the biztalk group dashboard, you have a list with errors and warnings. It would be good to add a clickthrough on that list, so you get taken to the error or warning in question (like you can when you click on the red or yellow box).
2 votes -
Web endpoint monitoring Email format
We have requirement to configure two alerts one for BizTalk monitoring and one for third party web endpoint monitoring.
If we wanted to use third party web monitoring alone in the alerts, it adds lot of additional information ofBizTalk server which is not required.
there should be flexibility email template which should be information in tabular format.
e.g
Service 1 : Green (normal)
Service 2 : Red (Status code 400 not found)
Service 3 : Green2 votes -
monitoring parties & agreements
Agreements in a party can get disabled, it would be great if we can perform auto start and monitoring on it.
2 votesEDI Parties and Agreement Monitoring is now available in BizTalk360 latest release v10.3.
Refer release notes for more detail.
-
Ability to send a Report depending on the result of a Secure SQL Query
Hi,
In the last version of BizTalk360, we have the ability to display Secure SQL Queries in Report which is good.
But now what is missing is the ability to send a report depending on the result of a Secure SQL Query. The use case is that on our side we have existing SQL Server Reports we want to replace with BizTalk360. These reports are sent by email to users only if for example a query returns results, or at the opposite if one query is not returning any results.2 votesAnalytics reporting has been improved. Use SQL Query reporting to get the results in csv format, and you will not receive an email if the query returns no records.
-
Ability to monitor RabbitMQ (on seperate host)
We're currently looking into implementing RabbitMQ. For monitoring they offer API's. However all our current monitoring tools don't offer build-in support to monitor RabbitMQ. Since it will be part of our integration platform we would like to be able to monitor this using BT360
2 votes -
Ability to do a quick add for new artefacts in apps
Hi,
Here is the use case: I have a BizTalk application with artefacts and the related BizTalk360 alarms with all artefacts mapped.
Now, I add a new receive location or send port in the application. It could be very useful to have the ability to detect, in BizTalk360, that for a particular alarm, there are "not mapped" artefacts and provide the ability to map them automatically.2 votesThis scenario can be achieved by configuring the Alarm to Monitor Unmapped Artifacts . This functionality is available in latest version 10.6 .
Reference document
-
Immediate email notification for threshold violation followed by persist duration before next email
Immediate email notification for threshold violation followed by persist duration before next email
When RL goes down, immediately 1 email,
wait for 10 minutes, & then the next email should go out.2 votes -
Message content In ESB data monitoring
Capability to attach the message content for ESB data monitoring like Suspended Messages.
By
Eric Abts2 votesThis functionality is available in the latest version 10.6 . By enabling the option in the ESB data monitoring schedule configuration ,the ESB message content will be attached in the alerts.
Check out the release notes and upgrade to the latest version 10.6.
-
Azure ServiceBus subscription monitoring
Please add the ability to monitor ServiceBus subscriptions (active and deadletter) like it is already possible for ServiceBus queues.
2 votesMonitoring the Azure ServiceBus Topics and subscriptions has been implemented in the latest version of BizTalk360 v10.1 (https://docs.biztalk360.com/docs/v101)
-
New feature requests on Autocorrect
I have couple of new feature requests for BizTalk360.
- Receive Location/Send Port/Orchestration - Auto Correct (set time)
- Option to configure BizTalk360 to try to auto correct artifacts in scheduled time (every 1 hour 5 times).
- Use case: BizTalk Receive Location A goes in disabled state. BizTalk360 tries to auto correct Receive Location 5 times and fails to restart port. Alarm email is sent to monitoring person, but it is night time and person is not available to react on alarm email. Receive Location stays disabled until monitoring person comes to work etc. and activates Receive Location manually.
…Solution: Set time
2 votesAutocorrect reset capability will solve this use case.
It is implemented in the latest versions of BizTalk360. -
Attached file to Alarm Mail
It would be nice for Invalid files (not validated in the incoming pipeline) or suspended, that you could choose to add the file to the alarm mail sent.
2 votes -
Event Log data Monitoring Enhancement on Filters
Currently Event Log data monitoring has no more than 5 conditions, either allow more conditions, or usage of comma’s for multiple ranges
Similar issue for ‘is not’ which can be achieved with ‘IS NOT BETWEEN’ option, allow comma to allow for more event ID’s2 votes -
The ability to use different locations for archiving messages, based on different Data Monitors
Option to use Data monitoring archive location based on Data Monitors and not all archived messages in one folder.
2 votes -
Add option to check FTP connection every specific period
Currently we have setup a datamonitoring for most of our external FTP partners as like a HeartBeat mechanism. However some our partners are not that amused if we connect every 2 minutes to their FTP environment.
Therefore would it be great if we additionally could specify the interval when a check should be done.
IE not the just the number of second, but a set like every 15/30/60 minutes etc!2 votesHi ,
BizTalk360 allows user to manage the polling interval , system will check the monitoring status only with the configured frequency . This can be configured under environment settings.
Thanks,
BizTalk360 Team
-
Data monitoring alert roll up
We have data monitoring alerts setup for a number of customers such as count > 0 in last 15/30/60 minutes etc. This obviously results in individual emails, however it would be good to be able to roll up emails. For example if I have a customer that doesn’t place an order from 10-11 and then 11-12 and then 12-1pm, can I get emails to roll up so each subsequent email shows the previous failures? Otherwise I will just have three separate emails which I have to check for each customer to see how long they have not been placing an…
2 votes -
Widget with errors
There is no widget in the operations dashboard to notify any kind of errors or warnings determined in the monitoring area. Knowing how many mappings and data monitoring is set up is more useful if you know what is actually wrong
2 votes -
Alert for wrong startup type from NT-Service
In the NT-Service monitoring I would like the option to make an alert for the startup-type. So we can quickly discover a wrong startup type.
2 votesIn the BizTalk360 latest release, NT Services startup type and log-on account can be monitored .
-
Mass remove orphaned feature
Hi,
When we monitor a lot of artefacts and after an import of an alarm exported from another environment, we have sometimes a lot of orphaned items.
It could be very helpful to have, in the import process, a way to remove all orphaned at the same time. Otherwise, we need to go into each application, go on send ports/receive ports/orchestrations, ...2 votesHi ,
In the latest version of BizTalk360, the orphaned artifacts will not be imported to the destination environment. The list of orphaned artifact details will be listed in the import status.
Thanks,
BizTalk360 Team
- Don't see your idea?