BizTalk360 - Monitoring
We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.
Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site
You can provide any ideas/suggestions related to improving BizTalk360 monitoring capabilities in this forum.
78 results found
-
Maintenance Alarm Exclusions
Maintenance Alarm Exclusions
Currently Alarms to keep enabled during Maintenance is a 'global' setting across all Maintenance schedules.
Depending on the 'maintenance' being done alters the alarms that should stay active.
For example, Server Patching with reboots may have no alarms that are left reporting.
Whereas installing/updating various BizTalk applications alarms monitoring network/infrastructure of the environment would want to be left 'active'1 voteImplementation of Maintenance Alarm exclusions per maintenance schedule is covered in the latest version of BizTalk360 (10.2)
-
Add a timer for disabling alarm for maintenance
It would be great if there was an option to set a timer for how long to disable an alarm. In today's busy world, sometimes an alarm is turned off for maintenance or testing, and users forget to re-enable once done. I would think a default of 24 hours would be more than sufficient.
2 votesHi ,
This can achieve by using Automated Task feature in BizTalk360.Create custom work flow and map the alarms that you want to disable ,then configure the schedule time to disable the selected alarm during that time.
-
Add Ability to Disable and Enable Specific Data Monitoring Entries
Occasionally I find it necessary to disable specific data monitors while a specific process is down or temporarily on hold. I don't want to disable the entire associated Alarm, as that would impact more than wanted. Since there is no Disable/Enable feature, I am forced to delete and recreate the Data Monitor instead.
1 voteFrom version 10.3 on the data monitoring schedule can be enabled or disabled based on the need .
-
Option to disable alerts for Data monitoring
We use data monitoring mainly for measuring purposes (analytics) and not for guarding the environment/processes.
To keep everything clean (especially when filtering the data monitor results) we do want to combine them into the same alarms as we use for guarding thresholds on the servers/artifacts.
So we would like to be able to disable alarm-triggers on each/all data monitor, the monitor just has to measure and put the result in its dashboard.1 voteHi ,
Now the data monitoring schedules can be disabled to stop monitor.
Thanks,
BizTalk360 Team
-
For IBM MQ we want to be able to enter the host name rather than the ip address
If we could enter the host name rather than IP address we would not be required to make a change if the backend MQ server was migrated to a new ip address thru an upgrade.
2 votesHi ,
This has been addressed in latest version of BizTalk360 v10.5.
Please read release notes for more details .
-
Lesser than operation in MessageBox Data monitoring
When expecting 10 running instances of a named orchestration, and if one disappeared, want to be alerted if the number of running instances has dropped below 10. To monitor this sort of scenario it would be better if MessageBox Data monitoring holds less than condition (>).
3 votesHi ,
The latest version of BizTalk360 allows you to set the rules using less than condition in Message Box Data Monitoring.
-
monitoring parties & agreements
Agreements in a party can get disabled, it would be great if we can perform auto start and monitoring on it.
2 votesEDI Parties and Agreement Monitoring is now available in BizTalk360 latest release v10.3.
Refer release notes for more detail.
-
Monitor Non-BizTalk/Non-SQL Servers
Currently we are able to monitor disks, resources, events and NT Services on BizTalk- and SQL-servers.
However our Integration-platform is bigger, we have several dedicated MSMQ- and IIS-servers which we would also like to monitor from within BT360.1 voteHi ,
You can add the external servers for monitoring using Add SQL Server option under Environment Settings->SQL Server. Here you can add Non BizTalk/SQL Servers , only constraint is the server should be under same domain .
Thanks ,
BizTalk360 Team
-
Report # of messages / application
I would like to see a Report over ## of messages per application and a Report over ## of messages / day / week / month totally(all applications)
We all know that statistics and diagrams is the major thing in all powerpoints so I want to add some extra into it.
4 votesIn Analytics widgets included number of messages per Application request in the latest version 10.4 https://docs.biztalk360.com/docs/v104
-
9 votes
This use case can be achieved with the BizTalk360 Automated Task feature which has been released in v10.3.
To know more read the release notes.
-
Age-based monitoring for Data Monitoring
When creating a Data Monitoring alarm, it would be great to be able to check for instances which are older than XX days/minutes/seconds.
For example : let's say we have 2 dehydrated (or suspended, or whatever) orchestrations, 1 created 3 days ago and 1 only 10 minutes ago. This feature would allow BizTalk360 to raise an alarm for instances that take too much time to complete, or suspended instances that have obviously been overlooked.
9 votesThis feature request has been incorporated in the latest version of BizTalk360 v10.1. To know more read the release notes (https://docs.biztalk360.com/docs/v101)
-
Schedule recurrent maintenance stops
It is possible to stop the alerts for maintenance immediately or in the future.
But what could be very good is the ability to set up recurrent stop for alerts, for example, each sunday at 4AM for 4 hours.6 votesRecurrence schedule maintenance configuration is implemented in BizTalk360 9.1 version. https://docs.biztalk360.com/docs/v9110890505
-
Email template
To enable users to select any range of colors (RBG, HEX Values) so that the emails colors and templates can be customized per company styles…
8 votesHi ,
The template can be customized with the predefined colors provided based on the theme selection(Dark/Light ).
Thanks,
BizTalk360 Team
-
DataMonitoring DashBoard: display monitoring results while clicking is not working as expected
Hi,
In the DataMonitoring DashBoard, when we click on a particular alarm in the calendar, it displays the detail in a pane that is opened at the right.
But when this panel is displayed, if we click on another alarm the detail of this alarm does not replace the one that is currently displayed.
And sometimes when we click on the alarm nothing happened, the detail is not displayed.1 voteHi ,
BizTalk360 UI is revamped now, in which the data monitoring dashboard is improved a lot . Upgrade to latest version to see the changes .
Thanks ,
BizTalk360 Team
-
Event Log data Monitoring Enhancement on Filters
Currently Event Log data monitoring has no more than 5 conditions, either allow more conditions, or usage of comma’s for multiple ranges
Similar issue for ‘is not’ which can be achieved with ‘IS NOT BETWEEN’ option, allow comma to allow for more event ID’s2 votes -
Disable group by error code in data monitoring "Send Instance Detail In Notification"
In order to setup real reports that can be sent to end users or technical super users with all errors given the time interval set in the monitoring details, there must be an option to disable the grouping by error code for "Send Instance Detail In Notification" option.
Example: An orchestration hits the suspend shape with different errors for the given process, each time the data monitoring alarm fetches these errors only the latest will be displayed in the notification as the suspend shape always gives the same error code (obviously).
7 votesThis feature has come as part of the version 8.9 release. Sing up to our newsletter to be notified of upcoming releases.
-
'Do not monitor' option for Web Endpoints monitoring
Kindly introduce a new feature 'Do Not Monitor' in the 'Web Endpoints' section so that we can make the web endpoints active / inactive on need basis.
Currently we dont have any option but to remove the endpoint in case of any issue.3 votesFrom BizTalk360 version 9.1 onward enable/disable the monitoring for Web Endpoints
-
Restrict alarms by user group
When defining alarms it should be possible to separate alarms by "user group". Essentially we will be sharing access to BT360 with our client and we would like them to be able to create their own alarms for their applications. However we don't want them to be able to edit (or delete) our alarms. It should be possible to separate alarms by user group.
7 votesRestricting the alarms by user access policies request has been implemented in the latest version of BizTalk360
-
Messaging latency SLA monitoring / alerting
Making extended use of the captured Messaging Performance analytics data, it would be good to be able to set a performance SLA for messaging through BizTalk. If the latency of a specific data interchange drops below the SLA threshold then raise an alert for investigation.
1 voteHi ,
Performance Monitoring feature in BizTalk360 data monitoring is enhanced to support BizTalk Messaging performance . Check out latest release notes v10.5.
-
Support SQL cluster monitoring
When SQL 1 server went down and SQL 2 (clustering) starts running BizTalk Server starts capturing and running. But BizTalk360 still pointing to that SQL1 sever and keep pooping the message "Disks: Configured Disk . No longer exist in the Server XXXXXXX." we expect BizTalk360 should support SQL Cluster Monitoring.
By Duane
16 votesThis feature is available in the latest version of BizTalk360
- Don't see your idea?