BizTalk360 - Operations

We love your feedback and look forward to hearing from you. A great place to post your ideas and vote up others. Please share your stories to help us build a product that best fits your needs.

Please note this site is only to get future ideas and suggestions. If you have any technical challenges with the current version of BizTalk360 please use our support site

Version 8.4 is now released. Download and give it a try

You can provide any ideas/suggestions related to Operations & Administration capabilities of BizTalk360 in this forum.

How can we improve BizTalk360 Operations & Administration capabilities?

(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  1. export / import all settings/config (not just alarms)

    as per subject.

    Ability to save msgbox queries, export then import to other envs (e.g. test to prod). Same for event viewer.
    Custom sql queries, BAM, etc.

    13 votes
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      I agree to the terms of service
      Signed in as (Sign out)

      We’ll send you updates on this idea

    • Providing KB Article on Generic Level

      Currently the KB articles can be created only for

      Service Instances
      ESB Exceptions
      Event Logs
      Throttling Data

      We need a provision to create KB article for 'General' category where we can provide KB articles for issues apart from the above 4.

      This will help the new users of BizTalk 360.

      9 votes
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        I agree to the terms of service
        Signed in as (Sign out)

        We’ll send you updates on this idea

      • Support SQL cluster monitoring

        When SQL 1 server went down and SQL 2 (clustering) starts running BizTalk Server starts capturing and running. But BizTalk360 still pointing to that SQL1 sever and keep pooping the message "Disks: Configured Disk . No longer exist in the Server XXXXXXX." we expect BizTalk360 should support SQL Cluster Monitoring.

        By Duane

        8 votes
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          I agree to the terms of service
          Signed in as (Sign out)

          We’ll send you updates on this idea

        • Customize maximum size from tracked message

          Occasionally we have an issue while saving a tracked message.
          The content is truncated while the size is more then 50.000 characters.
          We would like the opportunity to change this maximum size in the system settings.
          With the common limitation we lack some important information when the message is too big.

          7 votes
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            I agree to the terms of service
            Signed in as (Sign out)

            We’ll send you updates on this idea

          • Increase the maximum number of attachments to download

            There is a limit of 50 attachments to download in Graphical Flow (Tracking).
            Must there be a limit?
            I suggest that max matches will set the upper limit, but to keep the configuration so it is possible to set the limit lower for those who need it.

            7 votes
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              I agree to the terms of service
              Signed in as (Sign out)

              We’ll send you updates on this idea

            • Publish Secure SQL Query as Widget

              We just want to publish the query results on the dashboard in tabular format. At this point we don't yet need fancy PowerBI graphical view of this data.

              7 votes
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                I agree to the terms of service
                Signed in as (Sign out)

                We’ll send you updates on this idea

              • Support message security for resubmit

                All our BizTalk services need to support message security (TransportWithMessageCredential to be precise). This includes any resubmit services. At the moment there is no way to specify client credentials in BizTalk360, so the suggestion is to support client credentials for message resubmission.

                6 votes
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  I agree to the terms of service
                  Signed in as (Sign out)

                  We’ll send you updates on this idea

                • Configure Email Ids for UP alerts

                  Currently when an alarm is created, we can enter the email ids to which the DOWN and UP alerts will be sent to. This is OK if the same recipients are targeted for both DOWN and UP alerts. However, if the alerts are sent to a support system that creates the tickets for the support team to action then we need ONLY the DOWN alerts to be sent to the support system. And configure separate email ids for the UP alerts (excluding support system) to avoid the creation of automatic tickets for UP alerts.

                  6 votes
                  Sign in
                  Check!
                  (thinking…)
                  Reset
                  or sign in with
                  • facebook
                  • google
                    Password icon
                    I agree to the terms of service
                    Signed in as (Sign out)

                    We’ll send you updates on this idea

                  • Restrict alarms by user group

                    When defining alarms it should be possible to separate alarms by "user group". Essentially we will be sharing access to BT360 with our client and we would like them to be able to create their own alarms for their applications. However we don't want them to be able to edit (or delete) our alarms. It should be possible to separate alarms by user group.

                    6 votes
                    Sign in
                    Check!
                    (thinking…)
                    Reset
                    or sign in with
                    • facebook
                    • google
                      Password icon
                      I agree to the terms of service
                      Signed in as (Sign out)

                      We’ll send you updates on this idea

                    • Ability to reset alarm counters every x hours

                      We would like to be able to reset the number of sent alarms every x hours.
                      If our support personell forget to handle the suspended items, then they get new alarms after x hours.

                      6 votes
                      Sign in
                      Check!
                      (thinking…)
                      Reset
                      or sign in with
                      • facebook
                      • google
                        Password icon
                        I agree to the terms of service
                        Signed in as (Sign out)

                        We’ll send you updates on this idea

                      • Show all receive locations, all send ports or all orchestrations for application monitoring in one overview

                        In application monitoring I'd like to have the option to show all receive locations, all send ports or all orchestrations in one overview.

                        This would make it much faster and easier to add all items in your monitoring.
                        And this would also make it much easier to add new items in your existing monitoring or to do a weekly or monthly check whether all new items are added in your application.
                        Now we have to click and reclick thousands of items if we want to check we have all items in our application monitoring. Especially when you have a lot…

                        5 votes
                        Sign in
                        Check!
                        (thinking…)
                        Reset
                        or sign in with
                        • facebook
                        • google
                          Password icon
                          I agree to the terms of service
                          Signed in as (Sign out)

                          We’ll send you updates on this idea

                        • Add Word Wrap/Formatting to Message Details

                          Messages can be very large, so it's difficult to read them on the same line. We end up downloading them and reformatting them in VS or notepad++... Would be nice to be able to do that directly in 360...

                          5 votes
                          Sign in
                          Check!
                          (thinking…)
                          Reset
                          or sign in with
                          • facebook
                          • google
                            Password icon
                            I agree to the terms of service
                            Signed in as (Sign out)

                            We’ll send you updates on this idea

                          • ESB filter options- Improvement

                            1.Need an filter on failure column values that currently exist in the exception fault table. So that we can setup a proactive alarm on an application.

                            2.The only available filter expression is "is Equal To"

                            3. Filter with an 'OR' condition on the same column. i.e. Application is Equal To 'App1' or 'App2'. You can add another filter, but then you lose the selection of 'Application" on the second filter

                            4.There is no filtering defined for Scope
                            5.The only filter available on Exception Stack Trace is 'Is Equal To'

                            By Terry Stille,connexusenergy

                            5 votes
                            Sign in
                            Check!
                            (thinking…)
                            Reset
                            or sign in with
                            • facebook
                            • google
                              Password icon
                              I agree to the terms of service
                              Signed in as (Sign out)

                              We’ll send you updates on this idea

                            • Wildcard to event log sources for Avanced Event Viewer

                              Currently, you can only enter specific event sources. With a naming convention of custom event sources, it would be a lot easier to enter and maintain the Custom Event Viewer if we could use wildcards.

                              5 votes
                              Sign in
                              Check!
                              (thinking…)
                              Reset
                              or sign in with
                              • facebook
                              • google
                                Password icon
                                I agree to the terms of service
                                Signed in as (Sign out)

                                We’ll send you updates on this idea

                              • Holiday exclusions for process monitoring

                                Process Monitoring is a powerful feature, but often times when we’re monitoring receive or send ports, we need to exclude holidays. For example, if monitoring a send port to ensure at least one message is sent through it every MON-FRI (i.e. Business Day), we want to be able to exclude company holidays, such as Veteran’s Day, Thanksgiving, etc. It would be great if there were a list we could maintain for holidays within BizTalk360, and then when setting up Process Monitoring we could check a box to exclude company holidays. That would make the Process Monitoring feature even more valuable.…

                                5 votes
                                Sign in
                                Check!
                                (thinking…)
                                Reset
                                or sign in with
                                • facebook
                                • google
                                  Password icon
                                  I agree to the terms of service
                                  Signed in as (Sign out)

                                  We’ll send you updates on this idea

                                • Add pagination to Message Box/Tracking query results

                                  When Message Box or Tracking queries return many results, it would be helpfull to have pagination to navigate through all the results

                                  4 votes
                                  Sign in
                                  Check!
                                  (thinking…)
                                  Reset
                                  or sign in with
                                  • facebook
                                  • google
                                    Password icon
                                    I agree to the terms of service
                                    Signed in as (Sign out)

                                    We’ll send you updates on this idea

                                  • Alert counter

                                    if the Alert Counter is full they get no more notification until the Alert is solved or the Counter get reseted.

                                    In case it takes a while to solve the alerted issues they get no further alert when another mapped Service get down!

                                    As an example it would be a nice feature if the Alert notification would recognize after Location A is disabled and Alert Counter is full - now Location B goes down reset the Counter automaticly.

                                    In that way the Team get notified that another Service Location B is affected during they work to solve Location A.

                                    Is…

                                    4 votes
                                    Sign in
                                    Check!
                                    (thinking…)
                                    Reset
                                    or sign in with
                                    • facebook
                                    • google
                                      Password icon
                                      I agree to the terms of service
                                      Signed in as (Sign out)

                                      We’ll send you updates on this idea

                                    • We would like to see auto correction action to be coorelated to the monitoring interval

                                      We would like to see auto correction action to be corelated to the monitoring interval

                                      3 votes
                                      Sign in
                                      Check!
                                      (thinking…)
                                      Reset
                                      or sign in with
                                      • facebook
                                      • google
                                        Password icon
                                        I agree to the terms of service
                                        Signed in as (Sign out)

                                        We’ll send you updates on this idea

                                      • Larger Fault Description Textbox

                                        The SQL field is 4,096 chars so a one line textbox is too small. Make it bigger or resizable

                                        3 votes
                                        Sign in
                                        Check!
                                        (thinking…)
                                        Reset
                                        or sign in with
                                        • facebook
                                        • google
                                          Password icon
                                          I agree to the terms of service
                                          Signed in as (Sign out)

                                          We’ll send you updates on this idea

                                        • View Hydrated Orchestrations

                                          In BizTalk Admin Console you have the option to view all Dehydrated Orchestrations directly from the group overview.
                                          That was a quick way to view all dehydrated orchestrations and would be helpfull in BizTalk360 as well.
                                          BizTalk 360:
                                          In BizTalk360 you an see the dehydrated orchestrations in the Mssagebox queries or in the grafhical flow but is not posible to view only the dehydrated orchestrations. In some cases that should be very helpfull.

                                          In the messagebox queries it is not posible to choose Dehydrated.
                                          In the Graphical Flow you can add a filter on state but it is not posible…

                                          3 votes
                                          Sign in
                                          Check!
                                          (thinking…)
                                          Reset
                                          or sign in with
                                          • facebook
                                          • google
                                            Password icon
                                            I agree to the terms of service
                                            Signed in as (Sign out)

                                            We’ll send you updates on this idea

                                          ← Previous 1 3 4 5 6
                                          • Don't see your idea?

                                          Feedback and Knowledge Base